Video Card PROBLEM! please help?

So i just found out that i had 2 video cards installed on my computer. and i wanted to try my 2 video card to see how it looked. so i selected it and clicked ok and then i couldnt open up any windows. i restarted and everything but i still cant change it back. it shows no windows logon screen, no shut down screen, i cant open the display properties because the window won't come up. it shows at the bottom, but wont come up. i've tried safe mode and tried to change the display there but it wont let me cause it doesn't show any video cards. can someoen please help me switch it? PLEASE and thanks|||basically there is a video driver conflict happened there. i think what you should do is remove the other video card first(what i mean is physically dismount it in your computer) then go to cmos set-up. If you have a built in video card select it in the cmos setting (it pertains to VGA controller) select video booth device whether it is the AGP or PCI or the built in video card installed. Try to booth up again this time the computer will start to its default video driver. this time you could booth to safe mode and remove the video driver files of the one you are not going to use.



or if you 2 video card did you try to transfer the monitor vga connector to the other card just to check if it has display on it because if it has then that specific video card is the one being set by your computer to output it's video signal.



hope this help.....|||Connect it to the other card and change the video settings back to the other card.|||Instead of booting into Safe Mode, try booting into VGA Mode and change your settings.